Our Products

Premium Display Poll

Desire Pole

Silver anodised aluminium pole with top cap and built-in channels for easy mounting. Structurally approved and power-ready for solar or mains.
Find out more
Compact & Secure

Little Samson Timetable Case

Silver anodised aluminium pole with top cap and built-in channels for easy mounting. Structurally approved and power-ready for solar or mains.
Find out more
hinged case
Easy-Access Design

Hinged Door Case

Features a hinged door for quick and secure access to displayed materials. Built to withstand various weather conditions.
Find out more
Modular Display

Sectional Timetable Case

Modular design allows for flexible configurations. Suitable for various display requirements with easy maintenance.
Find out more
logomark
[placeholder]

Signage

[placeholder]
Find out more
logomark
[placeholder]

Temporary Bus Stop

[placeholder]
Find out more
2 bolt tapped 1024x542

Two-bolt tapped brackets

For fixing cases to other manufacturers poles using a Tamtorque Clip (additional cost).
Find out more
type 3 leaflet holder 1024x542

Leaflet Holder

Ideal for dispensing leaflets in a tidy and accessible manner. Available in various sizes to accommodate different leaflet dimensions.
Find out more
trilobal key

Trilobal Key

Trilobal Key designed for trilobal screws typically used in the bottom caps of our display units.
Find out more
slide in channel clamp

Slide-in Channel Brackets

Trilobal Key designed for trilobal screws typically used in the bottom caps of our display units.
Find out more
tamtorque clip

Tamtorque Clips

Available in a variety of sizes to suit your setup. Designed for mounting our display cases and flag brackets to standard poles with a secure, straightforward fit.
Find out more

12mm Banding

30m length of 12mm (1/2”) stainless steel banding, suitable for strong and reliable fixings.
Find out more

12mm Banding Buckles

12mm Banding Buckles designed to securely fasten 12mm (1/2”) stainless steel banding.
Find out more

19mm Banding

30m length of 19mm (3/4”) stainless steel banding, suitable for strong and reliable fixings.
Find out more

19mm Banding Buckles

19mm Banding Buckles designed to securely fasten 19mm (3/4”) stainless steel banding.
Find out more

Banding Tool

A durable tool designed for tightening stainless steel banding, suitable for both 12mm and 19mm widths, ensuring a secure and precise fit.
Find out more

Bottom Caps

Spare bottom cap for Sectional or Little Sampson Timetable Cases.
Find out more

Case Fitting

Hex bolt to slide into channel.
Find out more

Clear Front Panel Replacement

1.9mm thick clear perspex.
Find out more

Hex Ball Driver

Hex Ball Driver designed for hex socket screws, allowing use at angles up to 25° for easier access.
Find out more

Hex Key

Hex Key designed for hex screws commonly used in bottom caps of our display units.
Find out more

Poster Holder

Virtually unbreakable clear plastic holders with adhesive backing for window-mounted A4 and A3 posters.
Find out more

Pressure Board

2mm thick polypropylene - grips timetable at sides.
Find out more

Security Key

Security Key designed for hex socket + pin screws used in our hinged display cases.
Find out more

System Zero Screwdriver

System Zero Screwdriver designed specifically for use with System Zero tamperproof screws, ensuring secure and reliable installation.
Find out more

Timetable Carrier

0.75mm thick white sheet that allows you to stick or staple your timetable.
Find out more

Trilobal Screwdriver

Trilobal Screwdriver designed for use with trilobal tamperproof screws, offering secure and precise fastening.
Find out more

Vertical Flag Brackets

Y-shaped anodised aluminium brackets with a flag groove, secure fixings, and slots for full-length banding.
Find out more

Recent Downloads

View all products
desire pole
Instructional PDF

Desire Pole Assembly Instructions

Download
samson
Instructional PDF

Little Samson Assembly Instructions

Download
pole socket
Instructional PDF

Pole Socket Assembly with Top Connector

Download

FAQs

What is the expected lead time of my order?

If we need to manufacture any items in your order, your order will be out for delivery between 4-6 weeks. As all our timetable cases are stocked in mill finish, each aluminium component is powder coated to order. Therefore the lead time will vary depending on our availability. If we have your items in stock and they do not require any powder coating, you order will be out for delivery within 1 week.

What is included when I order a timetable case?

For each timetable case you order you will receive the case, bottom cap and clear front panel.

What are the mounting options for the Little Samson cases?

Wall: To mount with 2x PVC spacers via central holes (fixings not included.)

Pole/post: 2x two-bolt tapped brackets (inc. fixings), and 2x Tamtorque clips (or other banding of choice)

Desire Pole: 4 centre holes (already in place), 1x 4.5mm PVC case fitting.

What are the mounting options for the Sectional cases?

Wall: 4 corner holes (fixings not included).

Pole/post: 2x slide-in channel clamps and 2x Tamtorque clips (or other banding of choice)

Desire Pole: 4 centre holes (fixings not included)

Which flag brackets do I need?

If you are mounting the flag to a standard pole/post, you will need our ‘ Vertical Flag Brackets’ (fixings included), with your choice of banding.

If you are mounting the flag to our Desire pole, you will need our ‘Flag Fittings’ (pair, fixings included), which slide into the inner channels of the pole.

Can you powder coat the aluminium to any colour?

We can powder coat aluminium to your specified RAL code in house. However, if your order is less than 20 units or isn’t a standard colour, there will be a surcharge.

How much is delivery?

Our delivery charges will vary depending on dimensions and weight of packages, as well as if the items require palletising. We will issue you with the delivery charge during the quotation stage.